SINE WAVE INVERTER TECH WITH ONLINE TRAINING ON (DSP30F2010 IC)

DSP30F2010 SINE WAVE INVERTER TECHNOLOGY

We offer an online training on sine wave inverter technology through our social media platforms

§  Specifications for dsp30f2010 pure sine wave Inverter Technology:

• Output Waveform: Pure sine wave 50-60hz
• 12v/24v/48v/96V DC input
• 220v-240v AC output
• Output frequency: 50Hz
• Rated Power: 850VA - 7.5KW
• Work Efficiency: 85%-95%
• User friendly operation
• LCD/LED indication DISPLAY
• Full power and soft start
• High transformer efficiency, fast start
• Strong adaptability and stability
• Safe and reliable with built-in fuse
• Temperature controlled fan, safe & efficient
• Low voltage protection
• Over voltage protection 400vac
• Over load protection (adjustable with a keypad)
• Short circuit protection
• Input reverse connection protection
• Over temperature protection 
• 20khz switching frequency
• 
  
  Now you can be a Technology Independent manufacturer with our Solar  and dsp sine wave Inverter Technology.
  
  
  This inverter is best suited for manufacturing of domestic and office applications as it is simple and easy. It consists of only few components which are easily available, it has only simple components which are single sided PCB card. This board will be completed by mounting of heatsink along with MOSFET and soldering of few components. It contains LCD which displays all the parameters of the system and gives an indication about any error during the functioning of inverter. A 16 character double line type LCD will show the status of the inverter. It is very simple to set the values in menu driven set-up mode and is very easy to handle also by using a three button keypad.
  SETUP  COST AND  EQUIPMENTS:
    soldering irons, digital multi-meters, RPS, Glue guns and etc. which cost less
  How to Build a Solar dsp Inverter at Low Cost with Our Technology?
  For Production of 1000 watt Solar Inverters the list is as follows:
  1. Inverter Card 
  2. Solar Zero Drop Card 
  3. Copper Transformer 
  4. Casing  & Others 
  
  
  Note:
  • Above list is for 12V / 850VA with 30 Amps solar Charge Controller.
  • Production Cost may reduce up  If you go for Aluminium Transformer.
  Important Precautions to be Taken to Maintain this Solar Inverter:
  • Mains switch should be kept in ON position
  • Mains input should always be connected, to keep the battery in charging condition.
  • Water or any other liquids should never enter into circuit
  • This system installation place should be well ventilated and it should be easily accessible for servicing.
  How to Contact Us:
  Are you looking for solar Inverter Technology Transfer? Then you came to the right place. We have a sophisticated technology with us. If you are really interested to set up a Manufacturing unit,
  CALL/WHATSAPP : +2347018399701 
• JOIN OUR ONLINE TRAINING VIA WHATSAPP  LINK : (https://chat.whatsapp.com/I3iz3OX7PnhE0nAQO4UvXA)

FOR HEX FILES, SHCEMATICS AND CIRCUIT DIAGRAM YOU CAN ORDER FOR UR EMPTY PCB PANEL AT A CHEAP PRICE
https://chat.whatsapp.com/I3iz3OX7PnhE0nAQO4UvXA

Vidoe setup link: https://youtu.be/VCAVV20hHZA

DURING TESTING

EMPTY PCB CARD

ZERO DROP SOLAR CHARGE CONTROLLER WITH LCD DISPLAY

COMBINE OSCILATING BOARD WITH MOSFET BOARD

TESTING OF THE BOARD

GREEN BOARD WITH COMPONENT

CONTACT EMAIL : DSPFEM1991@GMAIL.COM
VIDEO LINK: https://youtu.be/hAwCUGleGOQ 

SOLAR CHARGE CONTROL (ZERO DROP) WITH CURRENT SENSING

 CURRENT SENSOR PWM CHARGE CONTROLLER

 

 

ZERO DROP SOLAR CHARGE CONTROLLER USING PIC16F876A  (WITH  ACS712 CURRENT SENSOR)

ZERO DROP SOLAR CHARGE CONTROLLER

 

PROJECT DESCRIPTION:

This circuit degisn is called ‘zero drop PWM solar charge controller’ because it doesn't have any diode drop of 0.65v.This is a mosfet based design which has very negligible voltage drop of  0.05v or less which means the loss is very less, ideal for solar applications.

NOTE : This design has a current sensing features with the aid of  (ACS712 CURRENT SENSOR)

       Since the drop is less, the losses are minimised so the efficiency achieved is > 99.5%

      In this circuit design,  two n - channel mosfets are connected in such a way that their sources become common and the drains will be connected to the negatives of battery and solar panel respectively and the gate will be triggered by the microcontroller (pic16f876a).

     The positives of solar panel and battery will be joined directly and the circuit  is  powered from that joint.

      When the solar power was present the circuit gets activated and micro-controller will pumps the signals that will be enough  to trigger the gate of mosfet, when the gate was triggered the negative voltage will flow through the mosfet and then the battery will be charged through solar panel.

Specification: 

Voltage         12v - 96v dc

Current        10A - 75A

Efficiency    > 99.6%

Protection against : Panel reverse

                                   Battery reverse

                                   Battery Overcharge ( full charge cut - off level can be set )

Charger is monitored  - 16 x 2 lcd display

Other feature - Opto - Coupler output for Charging signal to external circuits (like inverters)

 

                                                                          FIG1

                                                                           FIG 2

                                                                           FIG 3

                                                              FIG 4

      CLICK HERE FOR MMPT CHARGE CONTROLLER HERE
CONTACT ME ON ; +2347018399701
EMAIL;  DSPFEM1991@GMAIL.COM

ONLINE TRAINING ON DSPic SINEWAVE INVERTER DSP30F2010 SINEWAVE INVERTER COMPLETE FILES

       DSP30F2010 SINE WAVE INVERTER

DSP30F2010 TECHNOlOGY

DSP30F2010 SINE WAVE INVERTER TECHNOLOGY

§  Specifications for dsp30f2010 pure sine wave Inverter Technology:

• Output Waveform: Pure sine wave
• 12v/24v/48v/96V DC input
• 220v-240v AC output
• Output frequency: 50Hz
• Rated Power: upto7.5KW
• Work Efficiency: 85%-95%
• User friendly operation
• LCD/LED indication
• Full power and soft start
• High transform efficiency, fast start
• Strong adaptability and stability
• Safe and reliable with built-in fuse
• Temperature controlled fan, safe & efficient
• Low voltage protection
• Over voltage protection
• Over load protection
• Short circuit protection
• Input reverse connection protection
• Over temperature protection 
• 20khz switching frequency
• 
  
  Now you can be an Independent manufacturer of Solar and dsp sine wave Inverters through our Technology Transfer.
  
  
  This inverter is best suited for use at homes and offices  as it is simple and easy. It consists of only few components which are easily available,  it consists of simple components which are soldered on a single sided PCB card. This board is been completed by mounting of heatsink along with MOSFET and soldering of few components. It contains LCD which displays all the parameters of the system and gives an indication about any error during the functioning of inverter. A 16 character double line type LCD will show the status of the inverter. It is very simple to set the values in menu driven set-up mode and is very easy to handle also by using a three button keypad.
  
  
  Setup  Cost and  Equipments:
  You need not invest more on the equipments, you only need things like digital dc meter , soldering irons, digital multi-meters,  Glue guns and etc. which cost less
  How to Build a Solar dsp Inverter at Low Cost with Our Technology?
  For Production of 1000 watt Solar Inverters the list is as follows:
  1. Inverter Card 
  2. Solar Zero Drop Card 
  3. Copper Transformer 
  4. Cabinet & Others 
  
  
  Note:
  • Above list is for 12V / 850VA with 30 Amps solar Charge Controller.
  • Production Cost may reduce up  If you go for Aluminium Transformer.
  Important Precautions to be Taken to Maintain this Solar Inverter:
  • Mains switch should be kept in ON position
  • Mains input should always be connected, to keep the battery in charging condition.
  • Water or any other liquids should never enter into circuit
  • This system installation place should be well ventilated and it should be easily accessible for servicing.
  How to Contact Us:
  Are you looking for solar Inverter Technology Transfer? Then you are on the right site. We have a sophisticated technology with us. If you are really interested to set up a Manufacturing unit,

  CALL/WHATSAPP :  +2347018399701

  MAIL : DSPFEM1991@GMAIL.COM

  WHATSAPP GROUP:https://chat.whatsapp.com/I3iz3OX7PnhE0nAQO4UvXA 

FOR HEX FILES, SHCEMATICS AND CIRCUIT DIAGRAM YOU CAN ORDER FOR UR EMPTY PCB PANEL AT A CHEAP PRICE  AS WELL
THANKS CHECKING 

DURING TESTING

EMPTY PCB CARD

ZERO DROP SOLAR CHARGE CONTROLLER WITH LCD DISPLAY

COMBINE OSCILATING BOARD WITH MOSFET BOARD

TESTING OF THE BOARD

GREEN BOARD WITH COMPONENT

DSPic SINEWAVE INVERTER DSP30F2010 SINEWAVE INVERTER

DSP30F2010 SINE WAVE INVERTER TECHNOLOGY

§  Specifications for dsp30f2010 pure sine wave Inverter Technology:

• Output Waveform: Pure sine wave
• 12v/24v/48v/96V DC input
• 220v-240v AC output
• Output frequency: 50Hz
• Rated Power: upto7.5KW
• Work Efficiency: 85%-95%
• User friendly operation
• LCD/LED indication
• Full power and soft start
• High transform efficiency, fast start
• Strong adaptability and stability
• Safe and reliable with built-in fuse
• Temperature controlled fan, safe & efficient
• Low voltage protection
• Over voltage protection
• Over load protection
• Short circuit protection
• Input reverse connection protection
• Over temperature protection 
• 20khz switching frequency
• Andriod apk with bluetooth interfacing for smart inverter use
         its interesting to control the operations of your inverter from your andriod mobile device, whereby you can check the status of your inverter and perform various operation from your comfort zone.... and this cost a little amount to do
  Now you can be a Technology Independent manufacturer with our Solar  and dsp sine wave Inverter Technology Transfer.
  
  
  This inverter is best suited for manufacturing of domestic and office applications as it is simple and easy. It consists of only few components which are easily available, have only simple components which are single sided PCB card. This board will be completed by mounting of heatsink along with MOSFET and soldering of few components. It contains LCD which displays all the parameters of the system and gives an indication about any error during the functioning of inverter. A 16 character double line type LCD will show the status of the inverter. It is very simple to set the values in menu driven set-up mode and is very easy to handle also by using a three button keypad.
  
  
  Setup Cost and Equipments:
  You need not invest more on the equipments, the basic test jigs, soldering irons, digital multi-meters, RPS, Glue guns and etc. which cost less
  How to Build a Solar dsp Inverter at Low Cost with Our Technology?
  For Production of 1000 watt Solar Inverters the list is as follows:
  1. Inverter Card 
  2. Solar Zero Drop Card 
  3. Copper Transformer 
  4. Cabinet & Others 
  5.  Bluetooth device
  
  
  Note:
  • Above list is for 12V / 850VA with 30 Amps solar Charge Controller.
  • Production Cost may reduce up  If you go for Aluminium Transformer.
  Important Precautions to be Taken to Maintain this Solar Inverter:
  • Mains switch should be kept in ON position
  • Mains input should always be connected, to keep the battery in charging condition.
  • Water or any other liquids should never enter into circuit
  • This system installation place should be well ventilated and it should be easily accessible for servicing.
  How to Contact Us:
  Are you looking for solar Inverter Technology Transfer? Then you came to the right place. We have a sophisticated technology with us. If you are really interested to set up a Manufacturing unit,
  CALL/WHATSAPP : 07018399701 

FOR HEX FILES, SHCEMATICS AND CIRCUIT DIAGRAM YOU CAN ORDER FOR UR EMPTY PCB PANEL AT A CHEAP PRICE

Vidoe setup link: https://youtu.be/VCAVV20hHZA

DURING TESTING

EMPTY PCB CARD

ZERO DROP SOLAR CHARGE CONTROLLER WITH LCD DISPLAY

COMBINE OSCILATING BOARD WITH MOSFET BOARD

TESTING OF THE BOARD

DSP SINE WAVE BOARD DESIGN

ZERO DROP PROTEUS DESIGN

CONTACT EMAIL : DSPFEM1991@GMAIL.COM
To purchase new dsp inverter green panel (empty or completely soldered)
kaduna (nigeria): Call- 07018399701
abuja (nigeria): Call- 08138110639

 If you have any question, comment on this post.... mail: jvertechelect@gmail.com OR whatsapp me on :  +2347018399701